![]() ![]() ![]() ![]() Click on Config, then select Configure Ports, Mode Control, Audio, Other….Step four, if you don’t already have it, download and install N1MM Logger+. It’s free and you can find it here. I have included a couple of extra settings that will help later on when using PSK31, RTTY (FSK) and CW keying. Set the following menu items under MENU>SET>Connectors. These are the changes, leave everything else to default settings. Step three, turn your radio on and setup the Icom 7300 using the radio’s menu. Do not connect the USB cable until you have downloaded and installed the driver. Step one, if you haven’t already, download and install the USB driver from Icom for your Icom IC-7300. ![]() If you just want to use a USB Cable with HRD and operate some PSK31 or RTTY (AFSK), take a look at this video. I have found this to be the easiest, because later on I added cw keying and RTTY (FSK) to the mix. Use the CI-V for rig control and the USB for the soundcard. One is the USB cable connected to the radios USB port and the other is a CI-V cable connected to the radios CI-V port. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |